2” (50mm) Movement with Threaded Nipples Expansion Compensators and Housed Expansion Joints are basically a bellows that is protected by and guided within a pipe housing. While the industry offers two styles, one of which is referred to as “internally” and the other “externally pressurized”, they both serve the same function but we prefer the…
2” (50mm) Movement with Fixed & Floating Flanges Expansion Compensators and Housed Expansion Joints are basically a bellows that is protected by and guided within a pipe housing. While the industry offers two styles, one of which is referred to as “internally” and the other “externally pressurized”, they both serve the same function but we…
RESTRAINED FLANGED BELLOWS All Restrained Flanged Bellows are designed for 1” 25mm Compression, 3/8” 9mm Elongation and 1/8” 3mm Transverse movement. If piping is not anchored, the pressure will open the joints 3/8” 9mm. When proper anchors are installed, movements will take place as required. Pipe Size & Face to Face (in) Corrugations per foot…
¾“ TO 2“ There is a strong demand for stainless expansion joints in 2” thru 16” diameter with 2” axial and 1/4” transverse capability. Weld ends are most common, but there are also flanged requirements. All our flanged joints have one floating flange to facilitate installation and eliminate torsional stress. The other is raised face.…
2“ TO 16“ There is a strong demand for stainless expansion joints in 2” thru 16” diameter with 2” axial and 1/4” transverse capability. Weld ends are most common, but there are also flanged requirements. All our flanged joints have one floating flange to facilitate installation and eliminate torsional stress. The other is raised face.…
BRONZE BRAIDED 60Vee HOSE with COPPER FEMALE SWEAT ENDS for MEDICAL GAS When using VCPSB products in stainless steel water systems, dielectric unions must be used on each end to prevent leakage from galvanic action. Tubing Size & End to End (mm) Live Length (mm) Corru- gations per meter A (mm) B (mm) C (mm)…
BRONZE BRAIDED 60Vee HOSE with COPPER FEMALE SWEAT ENDS When using VCPSB products in stainless steel water systems, dielectric unions must be used on each end to prevent leakage from galvanic action. VCPSB Tubing Size & End to End (in) Live Length (in) Corru- gations per foot A (in) B (in) C (in) 1/2 x…
60Vee SS Braided Hose with Stainless Steel Threaded Nipples Many buildings are separated by expansion joints through the walls and floors. During an earthquake, the two adjacent parts resonate with relative motion of as much as ± 4” (100mm) in shear as well as toward and away from one another. Vertical motion is minimal. We…
60Vee SS Braided Hose with Stainless Steel Floating Flanges Many buildings are separated by expansion joints through the walls and floors. During an earthquake, the two adjacent parts resonate with relative motion of as much as ± 4” (100mm) in shear as well as toward and away from one another. Vertical motion is minimal. We…
60Vee SS BRAIDED HOSE with CARBON STEEL THREADED NIPPLES for SPRINKLER and FIRE PROTECTION SYSTEMS Our steam service ratings are very low in the interest of safety although our 70°F (21°C) pressure ratings are as high or higher then our competitors. All locations where failure could lead to personal injury or suffocation must be avoided.…