Series 600

Series 600 The Invincible 600 has a built in solid steel ring locked in place by reinforcement materials at the arch crown. This enables the 600 to handle vacuum conditions in excess of those listed for the 500 in multiple arch joints. Product Documentation

Series 1000

Series 1000 Expansion joints installed in piping systems that are anchored on both sides of the joint. No control rods are necessary. If control rods are installed as a safety measure, the locking nuts must be backed off with a clearance equal to the specified axial movement. The expansion joint will exert a thrust force…

BJW & BJF

BJW250 / BJF150 / BJF300 Ball joints have been around since the beginning of time. The writer first came across them during World War II where they were used on steam vessels to accommodate pipe expansion and twisting of the hulls. In all probability, they were used exactly the same way in the First World…

SPG

SPG Our newly developed Adjustable Sliding Guides offer many improvements over other guides: one size guide for all thicknesses of insulation, less friction with our Stainless Steel Slides, sturdier construction and they can be used as load supports as well. We still carry spider guides as well. Anchors are manufactured to order. Pipe Sizes (in)…

ASG

ASG Pipe guides shall be manufactured with stainless steel wrapping the carbon steel foot where it passes through horizontal U guides similarly lined to prevent corrosion. The base plate shall have multiple holes for bolting to beam flanges or flat surfaces. Bases may be welded in position in lieu of bolting. Height must be adjustable…

HEJW

Housed Expansion Joints with Weld Ends Expansion Compensators and Housed Expansion Joints are basically a bellows that is protected by and guided within a pipe housing. While the industry offers two styles, one of which is referred to as “internally” and the other “externally pressurized”, they both serve the same function but we prefer the…

HEJFFL

Housed Expansion Joint with Fixed and Floating Flanges Pipe guides shall be manufactured with stainless steel wrapping the carbon steel foot where it passes through horizontal U guides similarly lined to prevent corrosion. The base plate shall have multiple holes for bolting to beam flanges or flat surfaces. Bases may be welded in position in…