ECCPS-NSF

2” (50mm) Movement with Copper Sweat Ends Expansion Compensators and Housed Expansion Joints are basically a bellows that is protected by and guided within a pipe housing. While the industry offers two styles, one of which is referred to as “internally” and the other “externally pressurized”, they both serve the same function but we prefer…

ECCPS

2” (50mm) Movement with Copper Sweat Ends Expansion Compensators and Housed Expansion Joints are basically a bellows that is protected by and guided within a pipe housing. While the industry offers two styles, one of which is referred to as “internally” and the other “externally pressurized”, they both serve the same function but we prefer…

ECGWN

Expansion Compensator with Carbon Steel Weld Grooved Nipples Expansion Compensators and Housed Expansion Joints are basically a bellows that is protected by and guided within a pipe housing. While the industry offers two styles, one of which is referred to as “internally” and the other “externally pressurized”, they both serve the same function but we…

ECMN

2” (50mm) Movement with Threaded Nipples Expansion Compensators and Housed Expansion Joints are basically a bellows that is protected by and guided within a pipe housing. While the industry offers two styles, one of which is referred to as “internally” and the other “externally pressurized”, they both serve the same function but we prefer the…

ECFFL

2” (50mm) Movement with Fixed & Floating Flanges Expansion Compensators and Housed Expansion Joints are basically a bellows that is protected by and guided within a pipe housing. While the industry offers two styles, one of which is referred to as “internally” and the other “externally pressurized”, they both serve the same function but we…

RFB

RESTRAINED FLANGED BELLOWS All Restrained Flanged Bellows are designed for 1” 25mm Compression, 3/8” 9mm Elongation and 1/8” 3mm Transverse movement. If piping is not anchored, the pressure will open the joints 3/8” 9mm. When proper anchors are installed, movements will take place as required. Pipe Size & Face to Face (in) Corrugations per foot…

EW

¾“ TO 2“ There is a strong demand for stainless expansion joints in 2” thru 16” diameter with 2” axial and 1/4” transverse capability. Weld ends are most common, but there are also flanged requirements. All our flanged joints have one floating flange to facilitate installation and eliminate torsional stress. The other is raised face.…

EFL

2“ TO 16“ There is a strong demand for stainless expansion joints in 2” thru 16” diameter with 2” axial and 1/4” transverse capability. Weld ends are most common, but there are also flanged requirements. All our flanged joints have one floating flange to facilitate installation and eliminate torsional stress. The other is raised face.…

VCPSB-MG

BRONZE BRAIDED 60Vee HOSE with COPPER FEMALE SWEAT ENDS for MEDICAL GAS When using VCPSB products in stainless steel water systems, dielectric unions must be used on each end to prevent leakage from galvanic action. Tubing Size & End to End (mm) Live Length (mm) Corru- gations per meter A (mm) B (mm) C (mm)…

VCPSB & VCPSB-NSF

BRONZE BRAIDED 60Vee HOSE with COPPER FEMALE SWEAT ENDS When using VCPSB products in stainless steel water systems, dielectric unions must be used on each end to prevent leakage from galvanic action. VCPSB Tubing Size & End to End (in) Live Length (in) Corru- gations per foot A (in) B (in) C (in) 1/2 x…